Installation guide

Page 1-1
1
Introduction
The Asanté EtherPaC 2000+ adapter is a Plug-and-Play Ethernet adapter that
connects a personal computer with an Industry-Standard Architecture (ISA)
bus to an Ethernet network.
Plug-and-Play technology provides automatic configuration of new devices
without user intervention.
The EtherPaC 2000+ adapter has two fixed connectors: RJ-45 and BNC. An
optional AUI connector is also available. The adapter can be set to operate in
one of three modes:
❏ Plug-and-Play
❏ Jumperless
❏ Jumper
The adapter operates in either 8- or 16-bit slots, and is designed to comply
with the IEEE 802.3 Ethernet standard.
Hassle-free installation is achieved by conforming to Plug-and-Play ISA speci-
fications. For compatibility with older, non-Plug-and-Play systems, use the
configuration software program to configure the adapter instead of setting
jumpers.
The adapter can work with software drivers for Novell NE2000 adapters,
including NetWare ODI, Microsoft Windows 95, Windows NT, LAN Manager,
Windows for Workgroups, TCP/IP, etc.
EPaC 205-01A Book Page 1 Wednesday, October 15, 1997 3:40 PM