Installation guide

Page 3-4

Installing Network Drivers

4 Double-click the Network icon.

5 If you have previously installed a network adapter on the

computer:

❏ Click Adapters in the Network window

❏ Click Add

If you have not installed a network adapter on the computer:

❏ Click Yes in the Network Conﬁguration dialog box

❏ Select Wired to the Network in the Network Setup

Wizard window

❏ Click Next to continue

❏ Click the Select from list button

6 Click the Have Disk button in the Select Network Adapter

window.

The Insert Disk window appears.

7 Insert the Driver Disk into ﬂoppy drive A.

8 Type the following at the prompt: A:\WINNT40

9 Click OK.

The Select OEM Option window appears.

10 Select EtherPaC 2000+ Ethernet Adapter, then click OK.

If installing the adapter for the ﬁrst time, follow the Windows NT

instructions to install the appropriate protocols and network ser-

vices.

11 Click Skip in the Input Ethernet ID window if only one adapter

is installed. The Ethernet Adapter Bus Location window appears.

12 Select ISA bus type, then click OK.

13 Click Close in the Network window, then click Yes to restart.

EPaC 205-01A Book Page 4 Wednesday, October 15, 1997 3:40 PM