Installation guide

Page 3-2
Installing Network Drivers
Installing Network Specific Drivers
Novell NetWare Client
To install a NetWare DOS ODI driver automatically, run the INSTODI auto-
installation program on the Driver Diskette. Performing this procedure
installs all necessary NetWare DOS ODI client software, modifies the CON-
FIG.SYS file, and configures the adapter automatically.
1 Insert the EtherPaC 2000+ Driver Diskette into the computer’s
floppy drive A, then change to drive A.
2 Type the following at the DOS prompt: INSTODI
3 Press return.
The main display appears.
4 Press any key to continue.
5 Press 1 to select VLM or 2 to select NETX ODI Environment.
6 If you are using a non-Plug-and-Play system, you may be
prompted to activate the adapter. Press Y to activate the adapter.
The appropriate files will be copied to the default C:\NWNET
directory.
7 When the installation is complete, remove the Driver Diskette
and reboot the system.
8 Run STARTNET.BAT from the C:\NWNET directory to logon to a
NetWare server as a NetWare DOS ODI client.
Microsoft Windows 95
This section explains how to install the driver to use your adapter with Win-
dows 95. The instructions require that you have previously installed the Win-
dows 95 software on the computer without installing a network adapter or
driver.
EPaC 205-01A Book Page 2 Wednesday, October 15, 1997 3:40 PM