Installation guide

Page 5-5
Preparing the Network Server and PC
10
Select an address (for example C800H) and press Enter.
11
Select SAVE and EXIT, then press Enter.
The Setup program writes and saves the configuration to the
adapter’s EEPROM.
A message appears telling you the configuration is successful.
12
Press any key to continue back to the main menu.
13
Select EXIT and press Enter.
To create the image file for NetWare remote reset, please refer to the docu-
mentation that accompanies the Boot ROM product you installed.
Preparing the Network Server and PC
The procedure for preparing the server and the PC to use a Boot ROM is
dependent upon the Boot ROM product you use. Please refer to the user
documentation that came with your Boot ROM for instructions on preparing
the network server and PC.