Installation guide

Page 3-14
Installing Drivers
The Add Network Adapter window appears.
10
Select Unlisted or Updated Network Adapter from the list.
11
Click the OK button or press Enter.
The Install Driver window appears.
12
Insert the Asanté EtherPaC 2000+ Adapter Driver Diskette into
drive A:.
13
Type the following in the text box:
A:\WFW\WFW311
(The text A:\ may already be provided for you.)
14
Click the OK button or press Enter.
The Unlisted or Updated Network Adapter window appears.
EtherPaC 2000+ Adapter is listed in the window.
15
Click the OK button or press Enter.
The program asks you to confirm the Interrupt value. It should
be the same as the interrupt you selected during adapter configu-
ration.
16
If necessary, select the appropriate Interrupt value from the
popup menu.
17
Click the OK button or press Enter.
The program asks you to confirm the Base I/O Port. It should be
the same as the base I/O address you selected during adapter
configuration.