Installation guide

Page 3-9
Novell NetWare 4.x
❏
3 (default)
❏ 4
❏ 5
❏ 10
❏ 11
❏ 12
❏ 15
∆ You should avoid hardware interrupt 3 if you have a
device connected to the COM2 port, such as a fax,
mouse, or modem.
19
Press Enter.
You’re taken back to the Settings window.
20
Press the down arrow key to highlight Media Frame Type(s) and
press Enter.
The Media Frame Type(s) window appears.
21
Using the arrow keys, select one or more media frame types. To
select multiple types, press the F5 key after each selection.
∆ Ethernet 802.2 is now the default frame type for ODI
drivers. Existing LANs may be using Ethernet 802.3. If
you don’t know the media frame type for your network,
consult your network administrator.
For example, to select Ethernet 802.2 and 802.3, first select
Ethernet_802.2, then press F5. The selection begins blinking. Use
the down arrow key to select Ethernet_802.3, then press F5
again. Finally, press Enter to accept both selections.