Installation guide

Page 3-7
Novell NetWare 4.x
A message appears stating that client installation requires
LASTDRIVE=Z in the CONFIG.SYS and CALL STARTNET.BAT
added to the AUTOEXEC.BAT file (the install program will make
backup copies). You’re asked if you want to allow changes.
6
Type
Y
for Yes and press Enter.
The window shows the default subdirectory (C:\WINDOWS) for
Microsoft Windows. If your Windows software is in this default
subdirectory, skip to step 8.
7
If your Windows software is in a directory other than the default
shown in step 6, type the path name.
8
Press Enter.
9
Press Enter again to install the driver.
The Insert the Driver Disk window appears.
10
Eject the NetWare Client for DOS and MS-Windows Installation
Diskette #1 diskette and insert the Asanté EtherPaC 2000+
Adapter Driver Diskette into drive A:.
11
Type:
A:\NETWARE\DOSODI
(The text
A:\
may already be provided for you.)
12
Press Enter.
The Network Board window appears. The Asanté EtherPaC
2000+ adapter should be listed in this window.
13
Select the EtherPaC 2000+ adapter and press Enter.