Installation guide

Page 3-6
Installing Drivers
Novell NetWare 4.x
This section shows you how to install Novell NetWare version 4.x so you
can use your adapter with it. The instructions assume that
❏ You’ve already installed and configured the EtherPaC
2000+ adapter
❏ You have not previously installed NetWare software on
the computer
❏ No network driver is installed
❏ You’re using drive A: for the installation diskette
∆ If Novell NetWare software and/or network drivers have
previously been installed on your computer, consult
your network administrator and/or the Novell NetWare
documentation before proceeding.
1
Insert the NetWare Client for DOS and MS-Windows Installation
Diskette #1 diskette into the floppy drive.
2
At the DOS command line prompt, change to the A: directory.
3
Type
INSTALL
and press Enter.
The NetWare Client Install v1.11 window appears. The window
shows the default directory (C:\NWCLIENT) for installing the cli-
ent software. If you want to use the default, skip to step 5.
4
If you want to install the client software in a different directory,
type the path name.
5
Press Enter.