Installation guide

Page 3-2

Installing Drivers

After conﬁguring and testing the EtherPaC 2000+ adapter, you are ready to

install network drivers and work with your network operating system.

This chapter describes driver installation in four environments:

❏

Novell NetWare 3.x

❏

Novell NetWare 4.x

❏

Microsoft Windows for Workgroups

❏

Microsoft Workgroup Add-on for Windows

In general, the Asanté EtherPaC 2000+ adapter will support a network oper-

ating system (NOS) that works with NDIS and ODI drivers. For details about

installing your NOS and its drivers, see the manuals provided by your NOS.

For convenience, you can use the drivers provided with the EtherPaC 2000+

adapter, rather than your NOS drivers, because the drivers provide an auto-

detect function to determine the adapter’s current conﬁguration and auto-

set the driver to work properly. In this case, it is not necessary to conﬁgure

the NOS driver again.