Installation guide

Page 2-7
Configuring the Adapter
3
Select IO BASE and press Enter.
A list of I/O base addresses appears. The list includes:
❏ 0x300 (default)
❏ 0x240
❏ 0x280
❏ 0x2C0
❏ 0x320
❏ 0x340
❏ 0x360
Before choosing an I/O base address, please make sure that no
other adapter in the workstation uses it. (If two cards share I/O
addresses, neither adapter will work properly.)
4
Select an I/O base address and press Enter.
5
Select IRQ and press Enter.
A list of interrupts appears. They include:
❏ 3 (default)
❏ 4
❏ 5
❏ 9 (2)
❏ 10
❏ 11
❏ 12
❏ 15
The IRQ line is like a communication channel. You must have a
unique IRQ number for your adapter.