Installation guide

Page 2-6

Installing the EtherPaC 2000+ Adapter

❏

IO BASE

❏

IRQ NO

❏

INTERFACE

❏

BOOT ROM

❏

MEM. ADDR

❏

SAVE and EXIT

❏

QUIT (No Save)

To change a parameter value, select it using the UP or DOWN arrow key,

then press Enter. A pop-up menu shows the available values for the

selected parameter. Choose a value and press Enter to accept the new

value. When you’re finished, select SAVE and EXIT, then press Enter.

The following section describes each configuration step in detail.

Select MODE and press Enter.

The OPERATING MODE screen appears with the following oper-

ating mode options:

❏

NE2000 COMPATIBLE (default)

❏

Shared MEM. Mode

The EtherPaC 2000+ Ethernet adapter can be operated in

NE2000 compatible mode or shared memory mode. This parame-

ter lets you select the operating mode for the adapter and your

computer. If you select NE2000 compatible mode, the adapters

are fully compatible with Novell NE2000.

Select the appropriate mode and press Enter to accept this

option.