Installation guide

1-2 Introducing the EtherPaC 2000+ Adapters
EtherPaC 2000+ Adapter features
The features of the EtherPaC 2000+ Adapter series are
• Full compliance with IEEE 802.3 Ethernet standards
• Easy installation
• Support for 8-bit and 16-bit expansion slots
• Use of NE2000 drivers
• Diagnostic program
• Remote boot function for diskless PCs
• Support for a wide variety of networking software
Easy installation
You configure the EtherPaC 2000+ Adapter quickly and easily using the
Setup program; you do not need to set any jumpers.The program can
configure your adapter automatically or you can change the default set-
tings if you have a conflict with another card settings.
Support for 8-bit and 16-bit expansion slots
The EtherPaC 2000+ Adapter can be used on an 8-bit or 16-bit expan-
sion slot, enabling you to install the card in any available slot. The sys-
tem automatically detects which slot the card is using.
Diagnostic program
The diagnostic program included in the software package helps you
identify any problems you may have during the installation.
Remote boot function
The EtherPaC 2000+Adapter lets you reboot your PC from a remote
server on a NetWare network. For this you need to install a remote boot
ROM (purchased separately from Asanté) on the card. Chapter 3 gives
the installation procedure for this ROM.