Installation guide

A-2 Specifications
The settings supported for the adapter are
The power requirements are
a. Refer to the READ.ME file located in the subdirectory of your selected driv-
er for installation instructions.
Adapter Mode NE2000
I/O base address 0240, 0300, 0280, 02C0, 0320, 0340, 0360
IRQ 3, 4, 5, 9, 10, 11, 12, 15
Transceiver 3-in-1-—TP, BNC, AUI: 2-in-1—TP, BNC;
10BaseT—TP; Thin—BNC
For 3-in-1, 2-in1, 10BaseT, default is TP;
for Thin, default is Thin
Boot ROM address C0000, C4000, C8000, CC000, D0000, D4000, D8000,
DC000, Disable (default)
Turbo Mode Enable, Disable (default)
3-in-1 Adapter 10T Thin
UTP Transceiver: 0.49A
(Stand-by), 0.55A (Trans-
mit)
BNC Transceiver: 0.38A
(Stand-by), 0.49A (Trans-
mit)
AUI External Transceiver:
+12V/0.5A (Max.)
0.25A
(Stand-by),
0.33A
(Transmit)
0.38A
(Stand-by),
0.47A
(Transmit)