Installation guide

Booting up the PC from a Server 3-5
Preparing the Workstation PC
1 Create a DOS IMAGE bootable floppy disk:
C:/>format a:/s
2 Create the following files on the DOS IMAGE floppy disk:
CONFIG.SYS file:
FILES=20
BUFFERS=10
DEVICE=SETVER.EXE
AUTOEXEC.BAT file:
LSL
NWMLID
IPXODI
NETX
NET.CFG file containing:
LINK DRIVER NWMLID
FRAME ETHERNET_802.3
FRAME ETHERNET_802.2
PROTOCOL IPX 0 ETHERNET_802.3
3 Copy the following files to the DOS IMAGE floppy disk:
LSL.COM
NWMLID.COM
IPXODI.COM
NETX.EXE
SETVER.EXE