Installation guide

3-4 Booting up the PC from a Server
Preparing the network server
1 Create an AUTOEXEC.NCF file on the server.
The file below is an example of an AUTOEXEC.NCF file.
FILE SERVER NAME SERVER_GREEN
IPX INTERNAL NET 10
LOAD NE2000 PORT= 300 INT= 3 FRAME=ETHERNET_802.3 NAME=DOT3
LOAD NE2000 PORT= 300
INT= 3 FRAME=ETHERNET_802.3 NAME=DOT2
LOAD RPL
BIND IPX TO DOT3 NET= 100
BIND IPX TO DOT2 NET= 200
BIND RPL TO DOT2
The values in this file are examples only. Use the values that
apply to your network.
2 The \LOGIN directory must have:
NET$DOS.SYS generated by DOSGEN.EXE,
“patched” by RPLFIX.EXE
RBOOT.RPL Novell file
The \SYSTEM directory must have:
RPL.NLM Novell Netware loadable module for
remote program load
DOSGEN.EXE used to generate NET$DOS.SYS
RPLFIX.EXE used to “patch” NET$DOS.SYS
file server name
server interrupt
network number
port on NE2000
network number