Installation guide

Chapter 2
3-1
Chapter 3
Booting up the PC from a Server
You may want to boot up your PC from a remote server on the net-
work. Or you may have a PC without a boot diskette or a disk drive
and need to boot it up from a remote server.
In each case, to boot up the PC, you need to:
• Install an Asanté EtherPaC remote Boot ROM on the Ether-
PaC 2000+ Adapter
• Have Novell’s Netware software on the network
• Prepare the PC and the server
• Boot up the PC by rebooting the server
The 16 Kb Asanté ISA Boot ROM allows you to load the operating sys-
tem to a PC over the network.
This chapter provides instructions for each of the above steps
required.