Installation guide

2-8 Installing and Configuring the Adapter
Configuring the adapter automatically
1 Select the Asanté EtherPaC 2000+ Adapter in the Board
Selection Menu and press <Enter> .
The Main Menu appears with Auto Configuration selected:
Figure 2-5
The Main Menu
2 Press
<Enter>
.
The Setup program automatically configures the EtherPaC
adapter.
The Set Configuration Menu appears displaying the board’s
set default values as shown in Figure 2-6.
LAN Adapter Setup Program
Version 2.01 Release Date: June 11, 1993
MAIN MENU
Use or to select one of the following.
Then press Enter.
Auto Configuration
Set Configuration
Test the Adapter
Exit to Operating System
Enter = Select ESC = Cancel F1 = Help
ch 2 Page 8 Monday, August 26, 1996 11:06 AM