Product specifications

Before lowering the power supply, ensure the fanÕs power cable is

securely connected to power socket A on the power supply. Proper

air ßow is critical to system performance.

11. Replace the air bafße.

12. Replace the Avid Media Processor top cover and tighten the top

cover screws.

You might have to press the top cover to align the screws and

holes properly.

13. Reconnect any cables previously disconnected from the broadcast

panel.

Servicing Internal MediaDrives

Your Avid Media Processors might have two internal 9-GB

MediaDrives installed. The internal MediaDrives are only installed by

Avid Manufacturing.

The internal MediaDrives are mounted on a modiÞed bracket that

now secures the two MediaDrives and the diskette drive. Reference

this procedure if replacing an internal MediaDrive or its components.

If connecting external MediaDrives to the same SiliconExpress IV board that

the internal MediaDrives are connected to, use SCSI IDs 2 through 6. The

internal MediaDrives use SCSI IDs 0 and 1.

The following describes the complete procedure for replacing an

internal MediaDrive and components. To remove the drive bracket

and install an internal MediaDrive:

1. Remove the Avid Media Processor top cover as described in

ÒBroadcast Panel and Cover RemovalÓ on page 84.