Product specifications

8. Install the new SIMMs as shown in Figure 5-12.

SIMMs must be installed in identical pairs, in the slots marked on

the system board. First pair, second pair, and so on (order or blank

slot pairs do not matter).

Insert the SIMM into the slot on a 45-degree angle, then rotate the

SIMM to the upright position until it snaps into place. If there

seems to be too much resistance, do not force the SIMM. Reinsert it

and try again.

Figure 5-12 Installing SIMMs

9. Raise the power supply slightly and hold the uplock out of the

way.

10. Lower the power supply and return the power harness to its

former location.