Product specifications

94
6. Loosen the two captive screws that secure the air bafße as shown
in Figure 5-10.
Figure 5-10 Removing the Air Baffle
7. Pivot the power supply up as shown in Figure 5-11.
Use care when lifting the power supply to ensure the drive and
fan power cables connected to power sockets are not stressed. If
these are stressed, disconnect them from the power supply. Be sure
to reconnect them before powering on the Avid Media Processor.
c
Check to see that the power supply uplock falls into place before let-
ting go of the power supply. The power supply uplock is located on
the left side of the power supply toward the rear.
Air baffle
Screws