Product specifications

93
To install SIMMs in the Avid Media Processor:
1. Remove the top cover from the Avid Media Processor.
Use the procedure described in ÒBroadcast Panel and Cover
RemovalÓ on page 84 to remove the cover.
2. Discharge any static electricity by touching the power-supply
case.
3. Put on a wrist strap and attach the ground clip to the Avid Media
Processor chassis (see Figure 5-5). You are grounded properly only
if the Avid Media Processor is plugged in.
c
Semiconductor devices are vulnerable to damage by electrostatic
discharge (ESD). Use an ESD wrist strap or other grounding device
to ensure against electrostatic discharge.
4. Disconnect the external power cord from the rear of the system.
5. Dislodge the power harness as shown in Figure 5-9, but leave the
connector attached.
Figure 5-9 Dislodging the Power Harness
Leave harness
connector attached.