Product specifications

89
c
Only use NuBus boards designed speciÞcally for the Avid Media
Processor as described under ÒNuBus Slot ConÞgurationsÓ on
page 81. Rearranging factory-installed NuBus peripheral boards
may result in conÞgurations that do not function properly.
Follow these steps if installing a NuBus peripheral board:
1. Remove the top cover from the Avid Media Processor.
Use the procedure described in ÒBroadcast Panel and Cover
RemovalÓ on page 84 to remove the cover.
2. Discharge any static electricity by touching the power-supply case
or use an ESD wrist strap.
3. Remove the rear metal slot cover and the board hold-down rail for
the slot.
Figure 5-6 Removing Slot Covers and Hold-Down Rails
Hold-down rail
Slot cover
(loosen thumbscrew
(remove screw from
rear of chassis and lift)
from end and lift)
Metal tab fits into
slot in rear of chassis