Product specifications

37
Single-Channel AirPlay MP and
AirPlay MP/NewsCutter Installation
Avid fully integrates single-channel AirPlay MP systems; the
AirPlay MP/NewsCutter combination system requires assembly.
The basic steps for installing or checking the connections for a single-
channel AirPlay MP or AirPlay MP/NewsCutter combination system
are:
1. Set up the Avid Media Processor.
2. Connect the communication and control devices.
3. Connect the audio hardware.
4. Connect input/output devices, such as one or more decks, feeds,
or routers.
5. Connect the monitors.
6. Connect the drives for storing digital video and audio.
7. Make sure all the components are plugged into the power
sequencer and their power switches are on.
8. Start the system by turning on the power sequencer. The
sequencer starts the components in the proper order.
All Avid systems ship with the latest release of the Avid software
installed. However, if your system includes some third-party
software, you must install it yourself after reviewing the third-
party licensing agreements and terms. Exported systems might
not include some or any of the third-party software.
c
Some third-party software conßicts with Avid broadcast software,
causing unpredictable system operation. Before installing any third-
party software, call Avid Broadcast Customer Support to Þnd out if
the software will degrade the Avid system performance.