Product specifications

271
Avid rack-mount systems now include a power sequencer. This
component allows the entire rack to be started up with a single switch.
The power switch is also a circuit breaker. One power sequencer is
included with each Avid Media Processor.
Rack-mounted systems using 120 V ac require a female NEMA L5-20
connector located within 24 inches of the base of the rack. There must
be one connector for each Avid Media Processor in a multichannel
AirPlay MP system.
International rack-mounted systems are supplied with no input
connectors. Consult your local electrical codes for the proper
connector combination, for example, 10 A at 220 V ac. There is one
power input for each Avid Media Processor.
Table 17-4 lists the power requirements for individual system
components. The total approximate power for a system with one
MediaDrive is 915 W. Each system requires three surge and spike-
protected power strips (not supplied by Avid).
For best performance, keep all system power connections on the same
power feed distribution panel. Do not connect fans, lamps, coffee pots,
or other equipment to the same outlet that is powering the Avid
equipment.
Table 17-4 Power Requirements
Item Type Voltage Frequency Power
ATM switches
ASX-200BX Auto-sensing 120 V ac
240 V ac
60 Hz
50 Hz
200 W
ASX-1000 Auto-sensing 120 V ac
240 V ac
60 Hz
50 Hz