Product specifications

270
The base of each rack has casters and leveling feet that you can remove
to bolt the enclosure to the ßoor (see Figure 17-3).
Figure 17-3 Base for a Rack (overhead view)
Power Requirements
Make sure the site has an adequate power source with overcurrent
protection. If it is an existing power source, make sure that the
additional power draw will not overload the circuits. Take into
consideration the equipment nameplate ratings when addressing this
concern.
w
Most systems are designed to work with single-phase (3-wire)
power cord with a grounded neutral conductor. To reduce the risk of
electric shock, always plug the cord into a grounded power outlet
that meets all of the local electrical codes.
3.4 in (8.6 cm)
30 in (76.2 cm)
22.06 in (56.2 cm)
3.4 in (8.6 cm)
23.3 in (59 cm)
Front
Back
0.3 in (0.8 cm)
diameter hole for
bolting down rack
15.3 in (39 cm)
Removable casters
and leveling feet