Product specifications

257
¥ Rebuild the desktop by holding down the Option-k keys while
starting the Avid Media Processor. Keep holding down the keys
until you see a message asking whether you want to rebuild the
desktop. Click OK.
¥ If the document is from a DOS computer, use the PC Exchange
control panel to specify which Macintosh program will open the
document.
The system fails to boot or hangs after drive installation.
If the system fails to boot or it hangs after you install a drive:
1. Check that all SCSI devices on the bus have a unique SCSI ID.
Duplicate SCSI IDs will cause system problems.
2. Make sure that all SCSI cables are properly connected.
3. Check that the SCSI bus is properly terminated (see Chapter 9
).
4. If the system still will not boot or if it hangs, disconnect the drive
and bring the system back to its original conÞguration.
5. Turn on one external drive at a time and verify from within the
Control Panel SExpress application and conÞrm the SCSI setting
matches the one set on the drive.
6. If the system now operates properly, either the drive, a cable, or
terminator may be defective. Contact Avid Broadcast Customer
Support.
7. If the system still does not boot, recheck all connections and try
again. If it again fails to boot, contact Avid Broadcast Customer
Support.
A drive does not appear.
If drives do not appear on the desktop when you start the hardware
for the system, or do not appear in the menu of available storage
drives within the application, you can use the AVIDdriveª utility to
mount the drives.