Product specifications

233

Make sure you use the correct SCSI cables, addresses, and termina-

tion when setting up the new storage conÞguration. Do not use the

Mount command from the SiliconExpress control panel to remount

the drives.

Switching Drives After Turning Off the System

To switch a MediaDrive after turning off the system:

1. Choose Quit from the File menu to quit the software, or

press k-Q.

2. Choose Shut Down from the Special menu on the desktop to turn

off the Avid Media Processor.

3. Power off the MediaDrives.

4. For removable drives, turn off each drive in the chassis, then turn

off the chassis.

5. Switch the MediaDrives, making sure that the SCSI IDs for the

new drives are set correctly.

Take out the removable drives and insert new ones. Make sure the

drives spin down completely before you remove the drives.

6. Restart the system in the following order:

a. The chassis and each drive in the chassis

b. The MediaDrives

c. All other hardware except the Avid Media Processor

d. The Avid Media Processor

7. Launch the Avid application.

8. Reopen the project.

9. Choose Mount All from the File menu.