Product specifications

223
Shutting Down the Server
To shut down the server, you must be logged in as root. Use the
shutdown command:
% shutdown -g0
n
The prompt used in the above example may differ depending on the server.
Rebooting the Server
To reboot the server, you must be logged in as root. Use the reboot
command:
wvid> reboot
n
The prompt used in the above example may differ depending on the server.
The system displays the prompt again, then a series of status
messages.
Starting Up an ATM Switch
To restart an ATM switch, turn the power switch on and wait for the
switch to boot up. Typically, ATM1 or ATM2 will appear in the
window when the switch is ready.
Shutting Down an ATM Switch
To shut down an ATM switch:
1. Shut down the server.
2. Press the power switch on the front of the switch to 0 (zero).