Product specifications

219
Starting Up and Shutting Down Multichannel
AirPlay MP Systems
These directions explain how to start up and shut down all
multichannel AirPlay MP systems. See ÒStarting Up and Shutting
Down SystemsÓ on page 215 for information about NewsCutter,
Media Recorder, and single-channel AirPlay MP systems.
Starting Up Multichannel AirPlay MP Systems
n
When setting up the multichannel AirPlay MP system for the Þrst time,
locate and identify which are the playback, record, and control channels. For
information, see Chapter 12.
To start up a multichannel system:
1. Turn on all the peripheral hardware, such as the audio interfaces
and Video Slave Drivers, for all the channels.
2. Turn on all the buffer storage disks.
The buffer disks are contained in the MRS enclosures connected
directly to each channel.
3. Turn on all the disks that are part of the shared library, wait 10
seconds, then turn on the Avid MediaShare.
The shared library of disks is attached to the Avid MediaShare and
can include MRS and RAID enclosures.
4. Start the channels one at a time, with the control channel last:
a. Press the button for the channel on the user interface ADB
switch to select the channel that the record/engineering
workstation controls (see Figure 13-2).