Product specifications

191
5. Wait for the ÒonlineÓ or ÒOKÓ message to appear in the display of
each RAID, about one minute after you turn it on.
If the power supply on a MegaDrive unit fails (the alarm will go off),
shut off the MegaDrive unit, reseat the power supply, and try again.
The power supply in Ciprico units can be swapped while the unit is
running. See the Ciprico Disk Array 7000 Disk Array Guide for more
information.
Swapping RAID Unit Drives
You can swap drives in a RAID array while the unit is running. To
swap a drive:
1. Pull out the bad drive.
2. Gently plug in the spare. The drive connectors engage with very
little force.
For additional information about the MegaDrive arrays, see the
MegaDrive MX/500 RAID User Guide. For Ciprico arrays units, see the
Ciprico Disk Array 7000 Disk Array Guide.