Product specifications

184
Power Supply Shuttles
The array contains dual hot-swappable power supplies. Each power
supply is in an individual shuttle and can be replaced without turning
off the array. No manual switching is required to set the input voltage.
Audio Alarm
An audio alarm sounds when any of the following conditions occur in
the Ciprico array:
¥ A drive fails.
¥ The overtemp sensor detects excessive heat or fan failure.
¥ A power supply failure or power failure.
The audible alarm can be turned ON or OFF through the menu
settings. The default is ON. To temporarily silence the alarm when
sounding, press any arrow on the rocker arrow switch.
MegaDrive
MegaDrive storage units contain Þve 9-GB drives. Four drives are
used to store data, and one drive is a parity drive that can be used to
reconstruct data if a drive fails. A sixth spare drive is optional.
MegaDrives are rack-mounted four to a rack. Each group of four
represents a single volume on the server.
Select key After using the rocker arrow switch to maneuver through
the menu, press the select key to selected a new option or
default value. Defaults are indicated by an asterisk.
Table 11-5 Ciprico User Controls (Continued)
Control Function