Product specifications

166
Figure 10-1 User Interface ADB Switch (Front View)
The record/engineering monitor displays the selected channelÕs user
interface, including a command menu bar. You can use keyboard and
mouse controls to select channels. Select the channels by typing a
command or choosing them with the mouse from the menu bar
displayed on the monitor.
ADB Switch Jumpers
Avid sets the jumpers inside the user interface ADB switch before
shipping the equipment. These jumpers should not be changed. To
verify the jumpers, remove the cover screws located on the sides of the
ADB switch. The jumpers are located behind the channel connectors.
The jumpers are positioned on pins 2, 4, and 6 for each channel. The
jumpers are not numbered; when checking the jumper positions, count
them from the top to the bottom.
Connecting the ADB Switch
Connect only the record and playback channels to the user interface
ADB switch, not the control channel. To set up a single operatorÕs
position for the system, connect all the channels (including the control
channel) to the user interface ADB switch.
2 3 41
VIDEO SWITCHVIDEO SWITCH
These buttons correspond to the channels connected on
the back of the switch.