Product specifications

160
2. If the system is using a single-ended SCSI adapter board, replace it
with a SiliconExpress 4D board (see Chapter 5 for information on
installing system boards).
3. Use a 68- to 68-pin differential SCSI cable to connect Avid system
to the Avid MediaShare:
a. Plug one end of the differential cable into a SiliconExpress 4D
board installed in the Avid Media Processor.
b. Plug the other end of the cable into a differential SCSI host
connector on the back of the MediaShare (see Figure 9-17).
Figure 9-17 Avid MediaShare Connectors and Power Switch
n
Internal MediaShare switch settings can reconÞgure the drive ports. See the
Avid MediaShare UserÕs Guide for more information.
Power switch
AC power
connector
Serial interface
for diagnostics
SCSI host differential connectors (4)
SCSI drive single-ended connectors (2)
SCSI drive differential connector (1)