Product specifications

153
b. Plug the other end of the cable into a single-ended SCSI port
on the MRS.
c
Use only Þngers to tighten the jack screws on the cable connectors.
Excess torque can damage the screw socket.
2. Use a 12-inch 68- to 68-pin single-ended SCSI cable to connect the
Þrst MRS to a second MRS that includes no more than three
drives:
a. Plug one end of the cable into the remaining single-ended
SCSI port on the Þrst MRS.
b. Plug the other end into a single-ended SCSI port on the second
MRS.
3. Set the SCSI ID for each drive in the MRS enclosures to a unique
number from 0-6, inclusive.
4. Plug a single-ended terminator into the available SCSI port on the
second MRS.
Figure 9-14 Cables, SCSI IDs, and Terminator for Two MRS
Enclosures
Y
Y
R-Y
R-Y
B-Y
B-Y
Composite
Composite
UI Monitor Keyboard Remote GPI
Time Code In
Serial
Ports
1
2
4
3
Output
Input
Analog
Ref In
0
To SiliconExpress IV sIngle-ended board
1
3
2
4
5
6
MRS
MRS
Single-ended cable
SCSI ID
Drive
Avid Media Processor
SIngle-ended cable
Single-ended wide
SCSI terminator