Product specifications

152
2. Set the SCSI ID for each drive in the MRS to a unique number from
0-6, inclusive.
3. Plug a single-ended terminator into the available SCSI port on the
MRS.
Figure 9-13 Installing One MRS Enclosure
Connecting Two MRS Enclosures
This procedure describes how to connect two MRS enclosures to a
channel to provide local or buffer storage. Figure 9-14 shows a
diagram of the connections.
c
When connecting two MRS enclosures to the system, make sure that
the enclosures contain a total of no more than seven drives. The
MRS enclosures connect to the Avid system using single-ended
SCSI connectors.
To install two MRS enclosures:
1. Use a 68- to 68-pin single-ended SCSI cable to connect the Avid
Media Processor to an MRS enclosure that contains four drives:
a. Plug one end of the cable into a single-ended SCSI connector
on the Avid Media Processor.
Y
Y
R-Y
R-Y
B-Y
B-Y
Composite
Composite
UI Monitor Keyboard Remote GPI
Time Code In
Serial
Ports
1
2
4
3
Output
Input
Analog
Ref In
0
To SiliconExpress IV sIngle-ended board
1
3
2
MRS
Single-ended wide
SCSI terminator
SCSI ID
Drive
Avid Media Processor
Single-ended cable