Product specifications

149
n
SCSI IDs for AirPlay MP systems are set at the factory before they are
shipped.
c
Each device connected to a SiliconExpress board must have a unique
SCSI ID that is in the acceptable range for the storage system option.
Failure to set the IDs according to the speciÞcations for the storage
option could damage the drives.
Figure 9-10 shows the SCSI ID display locations on the back of the
MRS enclosures. Figure 9-11 shows the SCSI ID locations on the back
of the external MediaDrive. Press where indicated in the Þgures to set
the IDs for each device. See ÒConnecting Storage DrivesÓ on page 151
when connecting the devices.
Figure 9-10 Setting SCSI IDs on MRS Enclosures
MRS
MRS with storage expander
1 2 3 4
1 0 1 2
Press to increase the SCSI ID.
Press to increase
Press to decrease the SCSI ID.
Display showing IDs for four drives
the SCSI ID.
Press to decrease
the SCSI ID.
Storage expander ID
Drive IDs