Product specifications

133

3. ConÞgure the dialog box so it looks like the previous example.

a. Choose the Card slot number that is being used for your sys-

tem. Only the slot with the audio interface board will be

detected.

b. Choose 48000 for the Sample Rate. DNG systems only support

a sample rate of 48000.

4. If you are using Digital audio inputs, change the Ch 1, 2 Input to

Digital, the Digital Format to S/PDIF, and the Sync Mode to Digi-

tal.

Choose Digital audio input only if a valid, uninterrupted digital sig-

nal is available for the system. If digital audio input is disrupted,

system errors occur.

5. Click Recalibrate Inputs, then click OK.

Conﬁguring the Avid Eight-Channel Audio Interface

If your system has an Avid eight-channel audio interface, use the

Hardware Setup software to conÞgure your audio hardware the Þrst

time you run the system. If the system has the four-channel audio

interface, see ÒConÞguring the Four-Channel Audio InterfaceÓ on

page 132.

1. Double-click on your Utilities folder to open it. This folder is

located on the Avid system drive.

2. Double-click the Hardware Setup icon.