Product specifications

103
19. Connect the loose end of the MediaDrive power cable to power
socket D on the power supply as shown in Figure 5-19.
n
If the access to the power socket is tight, see ÒExpanding MemoryÓ on
page 92 for information on how to raise the power supply and gain more
access to the socket.
Figure 5-19 Connecting the MediaDrive Power Cable to the
Supply
20. Replace the Avid Media Processor top cover and tighten the top
cover screws.
You might have to press the top cover to align the screws and
holes properly.
21. Reconnect any cables previously disconnected from the broadcast
panel.
A
B
C
D