Installation guide

Page B-2
Wall Mounting the Hub
Your hub can be used as a desktop unit or as a wall-mount unit. A wall-
mount bracket and four screws are provided in the package. Two keyhole
slots are provided on the bottom of the hub so that it can be mounted on a
surface, such as a wall or the underside of a counter top.
To mount the hub, use the template on the next page to locate the screws in
the wall and follow the directions below.
1
Screw four 1 inch long (#4–32) wood screws 3" into the wall-
mount screw holes.
2
Screw two 3/4 inch long (#6–32) pan head machine screws into
the key screw holes, leaving approximately 0.15 inch of the
threads exposed.
3
Hang the hub on the wall using the keyholes provided on the
bottom of the hub.
BNCHub 194-00A Book Page 2 Wednesday, October 15, 1997 3:51 PM