Installation guide

Page 3-2
Troubleshooting Your Network
Before You Start
You test and monitor your network’s status with the aid of the LEDs on the
hub, the network interface card, or the BNC MAU. In general, the LEDs give
information about the status of a particular unit or function. This section
covers how to read the LEDs, both when testing your installation and during
normal network operation.
The hub does not require any routine maintenance because it doesn’t con-
tain any fans or other mechanical devices on which its operation depends. If
you cannot identify and correct a fault using the testing procedures
described in this chapter, contact Asanté Technical Support. There are no
user-serviceable parts in the Asanté BNC Hub/6.
BNCHub 194-00A Book Page 2 Wednesday, October 15, 1997 3:51 PM