Installation guide

Page xiv
About This Manual
This manual is divided into three chapters and three appendices:
Chapter 1, “Planning a Network Installation” on page 1-1, explains some
important considerations when designing and planning your network, and
provides the foundation for building reliable, easily managed, and expand-
able LANs. This is where to begin if you are not an experienced network
installer.
Chapter 2, “Installation” on page 2-1, shows you how to install the compo-
nents of an Asanté Ethernet network. It tells you in detail how to configure
the Asanté BNC Hub/6, either as a stand-alone unit or within a larger net-
work with multiple hubs.
Chapter 3, “Troubleshooting Your Network” on page 3-1, describes how to
interpret the BNC Hub/6 LEDs and how to troubleshoot common network
anomalies.
Appendix A, “Cable Wiring Diagram” on page A-1, covers the pin assign-
ments for the AUI (DB15) connector on the BNC Hub/6.
Appendix B, “Mounting the Hub” on page B-1, provides simple instructions
for wall-mounting your hub.
Appendix C, “Technical Specifications” on page C-1, provides all technical
specifications for the BNC Hub/6.
BNCHub 194-00A Book Page xiv Wednesday, October 15, 1997 3:51 PM