Specifications

ECCP Board Installation
WFPEEUI220001C0 B - 3
Jumper Settings
The ECCP has two jumpers (J208 and J218) that set the volt-
age to the Ethernet transceivers. These are set at the factory
for AAUI transceivers (+5 volts). Figure B-1 shows the jumper
settings.
Figure B-1. Jumper Settings
T02824A
J208
J208
J218
J218
FACTORY SETTING
DO NOT CHANGE
FACTORY SETTING
DO NOT CHANGE
120 PIN PCI BUS
CONNECTOR