Specifications

B - 2 WFPEEUI220001C0
ECCP Board Installation
• 3.2 amps is the load when +5 VDC is required for external
transceivers.
The ECCP board uses only the 5 VDC power for all of its
components.
Environmental Specification
Temperature: 0 to +60 degrees centigrade (board only).
The temperature specification of the personal computer is a
function of other product component temperature specifica-
tions (if lower) and internal temperature gradients.
Additional Requirements
AAUI transceivers are not supplied with the ECCP and they
need to be obtained separately. The AAUI Ethernet connector
is a standard connector used on Apple
®
-compatible products.
The following is a partial list of vendors who manufacture com-
ponents for this interface.
Component Requirement
Voltage 5 VDC +/- 5%
Current 1.2 A/3.2 A
Table B-1. AAUI Connector Vendors
Manufacturer Type Network Interface Model
Asanté Technologies™ AAUI to 10Base2 BNC (thin coaxial) FriendlyNet™ AAUI/BNC
Asanté Technologies AAUI to 10BaseT RJ45 (twisted pair) FriendlyNet AAUI/10BaseT
Asanté Technologies AAUI to AUI AUI FriendlyNet AAUI Thick/AUI
Dayna AAUI to 10Base2 BNC (thin coaxial) EasyNet™
Dayna AAUI to 10BaseT RJ45 (twisted pair) EasyNet-T™
Farallon AAUI to 10Base2 BNC (thin coaxial) PN504
Farallon AAUI to 10BaseT RJ45 (twisted pair) PN502
Allied Telesyne International AAUI to 10Base2 BNC (thin coaxial) AT-MX70
Allied Telesyne International AAUI to 10BaseT RJ45 (twisted pair) AT-MX60T
Allied Telesyne International AAUI to 10BaseF ST (fiber optic) AT-MX80F