Manualshelf

Installation guide

ManualsBrandsAsante ManualsComputer equipment10Base2
12345678910
Page 10
AsantéHub 2072 BNC Module Installation Guide
Using the BNC to
Connect to a
Management Station
To connect the BNC Module to a network management station
(PC or Mac) for an in-band connection, attach one end of a thin
Ethernet cable to a BNC port on the module’s front panel. Con-
nect the other end of the thin Ethernet cable to a T-connector, and
then connect the T-connector to either a PC or Mac. See Figure 6.
Figure 6 Using the BNC to Connect to a Management Station (PC or Mac)
UPLINK 0
AUI
PARTITION PARTITION PARTITION PARTITION PARTITION PARTITION PARTITION PARTITION PARTITION PARTITION
LINK/RECEIVE LINK/RECEIVE LINK/RECEIVE LINK/RECEIVE LINK/RECEIVE LINK/RECEIVE LINK/RECEIVE LINK/RECEIVE LINK/RECEIVE LINK/RECEIVE
AH2072H10-BNC
1
SEG1
SEG 0
2345678910
AsantéView
Management
Station