Installation guide

Table of Contents
Introduction 1-1
Summary of EN/SC adapter features 1-2
Installing the EN/SC Adapters 2-1
Preparing for the Installation 2-2
Software: 2-2
Hardware: 2-2
Observing the safety rules 2-5
link Integrity 2-5
Set adapter's SCSI address 2-6
Determine SCSI termination 2-7
Installing
the EN/SC adapter as the only SCSI de-
vice 2-9
Installing
the EN/SC adapter in a SCSI daisy-chain
2-13
. Installing the EtherTalk software 2-16
Two types of software installations 2-16
About EtherTalk Phase 1 and Phase 2 2-17
Accessing
network services 2-20
TroubleShooter Diagnostic Software 3-1
Running Troubleshooter Diagnostics 3-2
Changing from EtherTalk to LocalTalk 3-2
Starting TroubleShooter Diagnostics 3-2
Running other diagnostic tests 3-5
Running the Loopback test 3-5
Running the Bandwidth Utilization test 3-6
Obtaining system configuration information 3-9
Quitting TroubleShooter Diagnostics 3-10
Restarting network services 3-10
Asking for Assistance 3-11
Technical Support Hours 3-11
Troubleshooting 4-1
Check the basics 4-1
Run the Asante TroubleShooter Diagnostics pro-
gram 4-2
Other tips 4-2
About EtherTalk Phase 1 and Phase 2 4-2
Questions and Answers to common problems 4-3
EN/se Adapter Family