Installation guide

Run the Asante TroubleShooter Diagnostics program
Run the Asante TroubleShooter Diagnostics program to identify prob-
lems in the installation. Refer to Chapter 3 for more information.
Other tips
4-2
About EtherTalk Phase 1 and Phase 2
If you have installed both Phase 1 and Phase 2, selecting Phase 1 may
make Phase 2 network resources invisible and unavailable. The
reverse is true for Phase 2. Switch from one EtherTalk icon to the
other to see if this is the case.
Phase 1 networks are limited to 254 nodes and one zone. In a Phase
2 network up to 16 million nodes can be addressed on an Ethernet-
network. Phase 2 networks support multiple zones sharing the same
physical cable. A great majority of network installations now use
Phase 2 only.
Troubleshooting