Installation guide

About EtherTaIk Phase 1 and Phase 2
EtherTalk Phasel is limited to 254 devices and allows only one zone.
EtherTalk
Phase 2 has virtually no limit (maximum-over 16 million
devices)
and allows multiple zones. Phase 2 also offers optimized
network performance. The Easy Install provides EtherTalk Phase 2,
now used by most networks. If you want to access networks using
Phase 1, choose the customized installation.
A Caution
Before you install Asante's EtherTalk software, disable all exten-
sions
and virus detection programs. Then restart your Macin-
tosh.
1 Read the Read Me First file before you install the EtherTalk
software.
It contains information about your installation and helps
you determine if you need to do a customized installation.
The installation instructions assume that you normally
boot from your hard disk.
2 Insert the Asante EtherTalk Installer Disk.
3 Double-click the Installer icon and click OK when the In-
staller
banner appears.
The Easy Install dialog box appears .
• :. Note: To properly install th~ EtherTalk Installer program,
you must double-click the Installer icon. Do not drag the
files from the diskette to the System Folder.
Installing the EN/SC Adapters 2-17