Technical data

Page 3-11
Configuration Menu System
The bridge SNMP agent menu has the following four submenus:
Figure 3-7 SNMP Agent Parameters Menu
❏
TCP/IP Parameters, defining the bridge IP address, sub-
net mask
, and default router IP address
❏ Software Update, defining the server IP address for a
remote boot, the
boot protocol to be used, the boot file
name
, and the update command itself
❏ Access SNMP Trap Receiver Table
❏ Access SNMP Community Name Table
❖ Note: The SNMP parameters apply to both the hub and
bridge modules in the AsantéBridge 1012. The entire unit
has just one Ethernet address and one IP address.
❖
1
Use the Up/Down arrow keys to move the highlight bar to
select the submenu you want and then press
return.
This will open the selected menu window.
2
If you don’t want to select another menu, enter control-z
to return to the
Configuration Menu.
SNMP Agen
t
Parameters
Menu Syste
m