- Asante Technologies, Inc user manual Ethernet Switch IC36240 Series

1.4 Management and Configuration
The switch is managed using Command Line Interface (CLI) in order to access several different command modes.
Entering a question mark (?) at each command mode’s prompt provides a list of commands.
1.4.1 Console Interface
Support for local, out-of-band management is delivered through a terminal or modem attached to the EIA/TIA-232 or
USB interface. You can access the switch by connecting a PC or terminal to the console port of the switch, via a
serial cable. The default password set on the console line is Asante (it is case-sensitive). The default IP address is
192.168.0.1/24.
Remote in-band management is available through Simple Network Management Protocol (SNMP) and Telnet client.
When connecting via a Telnet session (line vty0), the default password is also Asante (case-sensitive).
See Chapter 2 for more information on connecting to the switch.
9 Asante IntraCore IC36240 Setup Guide