PRODUCT NO.
EXPLODED ILLUSTRATIONS Fig.
Fig.
Fig.
Fig.
Fig.
Fig.
Fig.
LIST OF SERVICE PARTS Product No. 232 ASAHI PENTAX SV Note: The parts with numbers starting with ' 0 ' are assembled parts ; the *marked parts are included in the ' 0' starting assembled parts; and these marked with ' o ' are same as the parts for Product No. 230-2. PART NO.
Tripod socket 1 A20 o A21 o Strap hook 1 A22 * o Plug seat 1 A23 * o Outer pole 1 A24 * o Inner pole 1 A25 * o Pressure plate retainer stud A 2 A26 * o Pressure plate rivet 2 A27 * o Key housing column 2 A28 o Key housing retainer plate 1 A29 * o Helicoid seat stopper 1 A30 o Body covering, left 1 A31 o Body covering, right 1 A32 * o Key housing covering 1 A33 * o Back cover covering 1 A34 * o Cassette holder rivet 2 A35 * o Earth 1 A36 * o Pressure plate re
0A53 Intermediate lever retainer plate assembly 1 (A53, A54, A56, A57, A61, LW13) A54 * Intermediate lever A 0A55 Intermediate lever B assembly (A55, A60) 1 A56 * Actuator lever 1 A57 * Intermediate lever shaft A 1 A58 Intermediate lever shaft B 1 A59 Intermediate lever spring hanger 1 A60 * Intermediate lever stud 1 A61 * Actuator lever shaft 1 A62 Intermediate lever spring 1 A64 Light seal B 1 A65 Light seal C 1 A67 * Light seal plate B 1 A69 * Light seal rivet 2
B17 0B18 o o Mirror check lever screw 1 Mirror actuator lever, top, assembly (B18, B39, 1 B51) 0B19 o Mirror actuator lever, bottom, assembly (B19, 0B20 o 1 B38, B58, B70) 1 Curtain actuator lever assembly (B20, B40) 1 B21 o Light seal 1 B22 o Light seal 1 B23 o FP lever A 1 B24 * o 1 0B25 B26 * 0B27 FP lever B o Sync seat assembly (B25, B23, B24, B26, B64, B65, B66, B73, B74, B77) 1 o Sync seat insulator 1 o Actuator lever assembly (B27, B28, B59, B67, 1 B68, B84) B28 *
B46 Mirror check lever spring 1 B47 o Bottom actuator lever spring 1 B48 * o Mirror seat lug rivet 2 B49 * o Mirror retainer plate rivet 2 B50 * o Mirror hinge shaft 1 B51 * o 1st dia lever pin 2 B52 * o Dia lever support 1 B53 * o 1st dia lever 1 o 2nd dia lever assembly (B54, B29, B37, B69) 1 B55 o 2nd dia lever retainer screw 1 B56 * o 1st dia lever shaft 1 B57 * o 1st dia lever spring 1 B58 * o Mirror actuator lever, bottom, stud 1 B59 * o 2nd dia lever adjust s
B78 * o Magnifier cusion 1 B79 2 o Ground glass holder B80 * o X lever rivet 1 B81 o Mirror hinge screw 3 B83 o Mirror checker spring 1 B84 * o Actuator lever coupler spring 1 B85 o Actuator lever spring 1 B86 o Mirror shock absorber 1 0C01 o Top mec plate assembly (C01, C41, C43, C79, 1 E20, E22, E26, E27, E28, E81, E120) 0C02 o Bottom mec plate assembly (C02, C45, C46, 1 C47) C01 C04 o Rapid wind lever 1 Non-return arm 1 C0S * o Lever seat lug 1 C06 * Counter advance
C20 0C21 Top 1st gear l o Top 2nd gear assembly (C21, C22) C22 * o Top 3rd gear l C23 * o Top main gear 1 C24 o Bottom main gear 1 C25 o Bottom 1st gear 1 C26 o Bottom 2nd gear 1 o Bottom 3rd gear assembly (C27, C30) 1 0C27 0C28 C29 Transport gear assembly (C28, C83) o Sprocket 0C31 1 1 C30 * o Sprocket shaft 1 o Wind-up shaft assembly (C31, C23, C32, C57, C75) 1 C32 * o Wind-up shaft bearing 1 C33 1 o Take-up spool shaft 0C34 Rapid wind lever shaft assembly (C34, C60, C85,
C50 Counter advance stud 1 C51 * o Coupler lever pin 1 C52 o R lever retainer screw 1 C53 * Retainer lug screw 1 C54 Counter retainer screw 1 C55 o Bottom 2nd gear screw 1 C56 o Sprocket screw 1 C57 * o Wind-up shaft spring 1 C58 o Take-up spool spring 1 C59 * o Lever seat lug spring 1 C60 * Counter spring 1 C61 o Non-return arm spring 1 G62 o R lever spring 1 C63 o Sprocket seat spring 1 C64 o Spring washer 2 C65 * Advance lug spring 1 C66 * Advance lug rive
C83 * Counter dial stopper A 1 C84 * Counter dial stopper B 1 C85 * Counter shaft 1 Counter housing assembly (C86, C08, C09, C53, 1 0C86 C82, C84, small screw FM 1.4 x 1.
E01 o Top shaft plate 1 1st curtain shaft plate 1 EO2 o E03 * o 1st curtain edger 1 E04 * o 2nd curtain edger 1 E05 o Release plate 1 o Bulb lever assembly (E06A, E06B, E71, E72, 1 0E06 B78, E87, set screw flat 1.4x2.
E29 o Shutter rod 1 E30 o Actuator rod 1 E31 * o 1st curtain pinion shaft l E32 * o 2nd curtain pinion shaft 1 E33 * o 1st curtain shaft 1 E34 o Curtain roller, small l E35 * o 1st curtain wind shaft, top 1 E36 * o 1st curtain wind shaft, bottom 1 E37 * o Curtain roller bearing 2 o Curtain roller, large, assembly (E38, E37) 1 E39 * o 2nd curtain pipe 1 E40 * o 2nd curtain wind shaft bearing, bottom 1 E41 * o 2 E42 o Curtain spring adjust lug 2 E43 * o Top selector
B60 o Adjust lug spring A 1 1st curtain checker arm spring 1 E61 o E62 o Bulb lever spring E63 o 1 Pinion coupler lever spring 0E64 o 1st curtain assembly (E64, E03, E12, E31, E33, 1 1 E35, E36, E47, E49, E55, E90, E91, E95, E96) 0E65 o 2nd curtain assembly (E65, E04, E39, E40, E41, 1 E47, E59, E67, E74, E94) E66 o Coupler lever spring hanger 1 E67 * o Curtain pipe 1 E68 a Speed selector disc 1 E69 * o Cam shaft 1 E70 * .
E90 * o 1st curtain wind shaft bearing, top 1 E91 * o 1st curtain wind shaft bearing, bottom 1 E92 o Curtain spring adjust gear A 1 Curtain spring adjust gear B 1 E93 o E94 * o 2nd curtain shaft 1 E95 * o 1st curtain pipe 1 E96 * o 1st curtain spring 1 E97 * o Bounce stopper 1 E98 o Bounce stopper actuator lever 1 E99 o Bounce stopper lever 1 E100 o Bounce stopper actuator lever screw 2 E101 * o Bounce stopper rivet 1 E102 o Bounce stopper spring 1 E103 o Bounce stopp
F01 0F02 F03 o Slow speed cam 1 o Cam coupler plate assembly (F02, F10) 1 o Time stopper 1 0F04 o Bottom adjust plate assembly (F04, F12) 1 0F05 o Top adjust plate assembly (F05, F06, F07, F08, F09, F14, F15, F17, F19, W2) 1 o Slow speed actuator lever 1 F06 * F07 * o Slow speed lever 1 F08 * o Slow speed Jever collar 1 F09 * o Lever support nut (Only 1 supplied with 0F05) 2 F10 * o Cam coupler plate stud 1 F11 1 o F12 * F13 Cam coupler plate nut o Slow speed rod o 1 Slow s
0H01 Self-timer box assembly (H01, H03, H04, H05, H06, H07, H08, H10, H45) 1 0H02 Self-timer box cover assembly (H02, H09) 1 H03 • Spring 1 H04 * Self-timer box lug 1 H05 * Self-timer box lug shaft 1 H06 * Spring hanger 2 H07 * Lug stopper 1 H08 * Lug spring 1 H09 * Cover stud 1 H10 * Hook 1 H45 * Hook retainer rivet 1 Self-timer governor assembly (H11-H44, H46) 1 0H00 232 -23-
LIST OF STANDARD PARTS Product No. 232 ASAHI PENTAX SV Small Screws Index No. 1 Surface Treatment Name Flat medium Place of Use Quantity G02, G13 2 Black E112, B77 2 Black G04. G14 2 1.2x1.6 Nickel plated 2 " 1.4x1.2 Black D01, D06 2 3 " 1.4x1.4 Black F03. C02 2 24 " 1.4x1.8 Black C82. C86 1 1.4x2 Black A49, A50 2 C82, C86 1 A01. G01 2 B52, B60 2 B02. B22 2 4 5 " 1.4x3 Black F04, F05 1 7 " 1.7x1.
Index No. 11 Name Flat medium Surface Treatment Place of Use Black A01, B02 2 A01, A08 1 C16, C47 2 1.7x3 12 " 1.7x3.5 Black C11, C42 1 13 " 1.7x5 Black B01, B02 3 14 " 2x3 Black C17, C24 1 2x4.5 Black A01, 2 Black D02, H02 3 1.7x2.2 Chrome plated A04, A20 2 A01, A28 2 A01, C32 3 A01, A20 2 A01, A10 3 C32, C34 3 2 x 3 . 5 Chrome plated A01, A03 2 A01, A04 2 Chrome plated A01, A03 2 A01, A05 4 E06A, E06B 1 2 15 25 Round flat medium 1.
Washers (Note: Asterisk * donote quantity which is subject to change.) Code W2 Material Steel Thickness (mm) Place of Use Quantity 0.03, 0.05. 0.1 0H00 2* F09, F14 W3 W5 1* Brass 0.4 E10 1 Steel 0.3 A51 2 0.1 E18 1 E99 1 Phosphor-bronze 0.2 E98 2 Steel 0.05, 0.1, 0.2 B02. B54, B55 1 A01, A05 4* W8 Phosphor-bronze 0.1 B02, B35 1 W9 Brass 0.4 C70 1 W10 Steel 0.05 C26 1 Wll Phosphor-bronze 0.1. 0.15, 0.2, 0.
Lock Washers Code Material LW10 LW13 LW17 „ (Black) 232 Thickness (mm) 0.2 Place of Use Quantity C41 1 C85 1 B76 1 A45 1 A57 1 A58 1 E33 1 E94 1 E105 1 F12 1 0.4 E50 1 „ A36 2 0.
